Echo-bear-cat 71125 Manual de usuario

Busca en linea o descarga Manual de usuario para Herramientas Echo-bear-cat 71125. Echo Bear Cat 71125 User Manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 4
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
Instruction Sheet
Instructions
PN 71151
Rev. 121708
SUBJECT: 20-FOOT VACUUM HOSE
ATTACHMENT KIT # 71125
FITS MODELS: SC5540 (70054)
AND SC5614 (71020)
Before inspecting or servicing any part of this machine,
shut off power source, remove key, disconnect the
battery cables and make sure all moving parts have
come to a complete stop.
WARNING
These instructions will describe how to attach the 20-foot vacuum hose to a chipper/shredder. Note that this kit is to be
used only on machines that already have the Two-Speed Blower Kit (PN 71110) installed.
MOUNT LATCHES FOR RUBBER STRAPS
Place the vacuum hose inlet plate over the chipper/shredder hopper so that the hose inlet is on the side near the 1.
chipper chute end.
Locate the position where the strap latches should be bolted by pulling the latch down to the hopper. The strap 2.
should be tight. Push the strap end into the latch and mark the place on the hopper where bolt holes should be
drilled.
Drill two holes 1/4" in diameter in the hopper. 3.
Secure the strap latch to the hopper with two (2) 10/24 x 1/2 inch bolts and nuts.4.
Repeat steps 2-4 for the strap on the other side.5.
Vista de pagina 0
1 2 3 4

Indice de contenidos

Pagina 1 - Instructions

Instruction SheetInstructionsPN 71151Rev. 121708SUBJECT: 20-FOOT VACUUM HOSE ATTACHMENT KIT # 71125FITS MODELS: SC5540 (70054) AND SC5614 (71020)

Pagina 2 - ATTACH VACUUM HOSE

Instruction SheetATTACH VACUUM HOSEPlace one hose clamp around the end of the vacuum hose.1. Place the hose over the inlet on the plate.2. Position an

Pagina 3 - 20’ VACUUM HOSE ATTACHMENT

Instruction Sheet20’ VACUUM HOSE ATTACHMENTITEM PART NO. DESCRIPTION QTY.1 71087 WELDMENT, HOSE INLET 12 71017 WELDMENT, VAC HOSE ADAPTER 13 17359 8”

Pagina 4 - OPERATION TIPS

OPERATIONSet speed control lever to SLOW.1. Start engine or engage PTO.2. Make sure that the vacuum nozzle is pointed in the proper direction.3. Slowl

Comentarios a estos manuales

Sin comentarios